Vibrating Screen Systems

Vibrating sieve systems are one of the important systems in stone crushing plants. Vibrating screen have a mechanism to separate the crushed materials from each other according to their sizes, allowing users to obtain materials of different sizes at the same time. In order to choose the vibrating screen, the type of material produced, washing condition and humidity are important. As a result of the values ​​revealed by these men, the required vibrating sieve is selected.

Vibrating screen have a complex mechanism and are formed by the combination of many mechanical evenings. Since this equipment is used in hard materials such as stone, it is very important that the products brought together in its construction are robust. Users who want to buy a vibrating sieve should pay attention to whether the material used in the sieve construction complies with the required international standards. The use of products that do not have sufficient strength in vibrating screens will lead to low production efficiency.

Powerful Vibro Motors in Vibrating Screens

With the power of vibro motors, which is the most important mechanical product of vibrating screens, it is possible to quickly produce crushed materials at high capacity. The use of high quality vibro motors from domestic producers producing vibro motors in our country contributes to domestic and national capital. It is possible to obtain vibrating screens with high forces thanks to the vibro motors produced with 2, 4, 6 or 8 poles. The fact that the vibro motors produced have the Atex certificate prevents the flame sparks that occur during screening from damaging.

It is important that the selection of vibro motors to be used in vibrating sieve systems is made by experienced engineers, and it will ensure that the installed sieve system works with high efficiency.

Working Principle of Vibrating Screen Systems

When making vibrating screens, it can be more than one layer depending on the material to be separated. These sieve systems, which are manufactured in 2-3-4 layers, allow users to distinguish up to 4 material types at the same time. Vibrating screens use a vibro motor according to the number of floors it has, and in order to drive the system, it is driven by an eccentric weight located on both ends of the eccentric shaft, which is embedded in the sieve body of special bearings aged in the shaft system. The sieve system, which starts to work in this way, separates the necessary materials from each other and directs them to their destinations.

Di-Çelik Vibrating Screen Models

Vibrating screens are designed in different models to be suitable for the material to be separated. The situation of the crushed materials in the stone crushing plants and the differences of the crushers have led to the need to make different screening systems. Di-Çelik provides multiple vibrating sieve system services with its engineers. The names of the models were determined according to the dimensions of the sieve systems. The dimensions of the DÇ-1240 vibrating screen are 1200×4000 and it has a power of 7.5kW. This sieve type is suitable for small capacities. DÇ-1540 is bigger and stronger with its 15kW moto power. DÇ-20×50 model has 18.5kW motor power. For separating larger and heavy materials, there are 22kW DÇ-2060 model, 2x22kW DÇ-2460 model and 2x30kW DÇ-2570 models. All men can be manufactured in 2-3-4 layers.

There is enough width between the sieve layers to easily change the sieve wires, the wire tensioning system allows the wire change to be done quickly. Thanks to the features of the sieves, maintenance controls are safe and easy.